20 Amp, 240V 10m Single Phase  Extension Lead Rubber Insulated

20 Amp 

Australian Standard

Rubber Insulated Extension Lead

3 Flat Pins.

Length: 10 m

Australian Standard single phase extension leads.

These abrasive-resistant rubber-insulated extension leads are recommended for indoor, outdoor, and harsh environments.

(Intermittent use: Ambient temperature above 40)

Applications: 

• Wet and oily environments
• Construction site leads
• Submersible Pumps 
• Flexible connections to motors, generators, compressors, e.g.
  • Drills & pumps
  • Saws & log splitters
  • Cranes & Hoists
  • Handheld drills
  • Grinders & welders
  • Agricultural equipment 
  •  Generators
  • 240V Vacuums & floor grinders. etc

• Event and temporary cabling, e.g. 
  • fairgrounds 
  • sporting venues
  • Stage & theatre power.

This 20A flexible extension lead is suitable for dry and damp areas. Environments with vibration or potential impact. The cords resist abrasion, exposure to radiated heat and chemical contamination. The black, flame-retardant sheath makes it suitable for areas subject to hazardous working conditions and locations like engineering workshops.

Maximum Ambient temperature: 40°C

Maximum Continuous Length:  30m (with a 3% voltage drop)

Maximum current at 40°C: 20A

Cable  Specifications:

Cable CSA:2.5mm²

Max Voltage: 06/1kV

Insulation: Ethylene-propylene rubber (EPR) R-EP-90   90 deg C Conductor

Sheath Colour: Black - UV, sunlight and weather resistant.

Cable Temperature Range: -25 degrees C to +90 degrees C (mobile) -40 degrees c to +90 degrees C (fixed)

Maximum permissible short circuit temperature: 250 deg C for 1 Sec

EEC is an online mail-order store, and customer pickup is Unavailable.